-40%
Long Printhead Wiper Blade for Matching DTF Printer Maintenance Stations, 1 Piece to Pinterest (opens in a new window)

Long Printhead Wiper Blade for Matching DTF Printer Maintenance Stations, 1 Piece

Original price was: ₹1,500.00.Current price is: ₹900.00.

Long printhead wiper blade supplied as one replacement part for a matching DTF printer maintenance station.

Long printhead wiper blade supplied as one replacement part for a matching DTF printer maintenance station.

  • Pack contents: one blade in the pictured configuration.
  • Compare the blade profile, dimensions, mounting and contact position with the original part.
  • Keep the service area clean and follow the printer maintenance procedure.
  • Check the installed blade clears residue without forcing or scraping the nozzle surface.

Compatibility depends on the exact maintenance assembly. Printhead, capping station and printer are not included. Taxes and shipping apply at checkout.

GST invoice available / Shipping calculated at checkout / Product support

Frequently bought together

Complete your setup

Useful add-ons commonly paired with this product. Choose only what you need.

Ask expert

Description

long printhead wiper blade — Overview and practical use

Long printhead wiper blade supplied as one replacement part for a matching DTF printer maintenance station.

What you receive for the listed price

  • One DTF Wiper Blade Long India in the selected configuration.
  • This price is for one piece; a complete printer, ink supply and unrelated assemblies are separate.

Applicable taxes and shipping, where relevant, are shown at checkout. Gallery guides and demonstration equipment explain use; they are not additional supplied items.

long printhead wiper blade for effective printhead cleaning
Product view for effective printhead cleaning.

Fitment and the surrounding system

A replacement component works as part of an existing machine. Matching the physical interface, electrical specification where relevant, and the original operating function is essential. A similar product name is not a substitute for those interfaces.

DTF Wiper Blade Long India
Product view.
long printhead wiper blade — fitment and interface guide
Illustrated guide: fitment and interface guide. Educational illustration, not a product photograph.

Daily use and practical checks

When working with long printhead wiper blade, a hardened or distorted blade can redistribute residue instead of removing it. Inspect the holder and blade condition together during service.

A practical service approach

For long printhead wiper blade, isolate the equipment before mechanical or electrical service. Record the original routing and orientation, keep the work area clean and avoid forcing a component into position. After fitting, use the machine's normal service checks to establish that the original symptom has been resolved.

DTF Wiper Blade Long India
Product view.

How this component fits into the printer

Printer service parts belong to a connected mechanical, fluid or electrical system. Their value comes from restoring the intended function at a particular point in that system. A component close to the printhead can influence ink delivery or sealing; a motion or sensing component can affect the way the machine positions and monitors its working parts.

The role described above identifies the purpose of this item. Understanding that role helps distinguish the component itself from adjacent parts that may produce a similar symptom. It also gives the replacement a clear technical objective rather than treating it as a general upgrade.

long printhead wiper blade — how this part works
Illustrated guide: how this part works. Educational illustration, not a product photograph.

The interfaces that determine fitment

Useful identification points include the mounting position, hole pattern, port arrangement, connector type and relevant dimensions. Where a component is electrical, its rating and pin arrangement matter as well as the outside shape. Where it carries liquid or air, the connection size, seal geometry and intended flow path matter.

Compare those features against the original assembly and the machine documentation. Printer and head-family names help narrow the application, but conversion layouts and revisions can differ. Keep the old part available as a physical reference until the service work and the normal operating checks have been completed.

DTF Wiper Blade Long India
Product view.

Diagnosing the surrounding fault

Start with a clear record of the symptom: which channel, movement, connection or operating step is affected, and whether the issue is constant or intermittent. Inspect accessible surrounding parts for contamination, loose connections, wear or mechanical obstruction before deciding that one component explains everything. A defect that appears only during carriage movement can have a different cause from one present while the machine is parked.

Methodical observation saves unnecessary changes. Record the original condition before dismantling, especially when several similar connectors or tubes are grouped together. This makes the installation easier to verify and the repair history more useful later.

long printhead wiper blade — finding the cause of a fault
Illustrated guide: finding the cause of a fault. Educational illustration, not a product photograph.

Preparing for controlled replacement

Use the equipment's shutdown and isolation procedure before mechanical or electrical work. Allow hot or moving assemblies to reach the safe service state specified by the manufacturer. Photograph the original routing and orientation, identify each connection and prepare a clean place for small fasteners. Keep ink residue, dust and loose hardware away from sensitive surfaces and exposed connectors.

A correct replacement should seat according to its intended mounting arrangement. Forcing a fit or adding improvised spacers can transfer stress to neighbouring components and create a second problem. Tasks involving head wiring or machine calibration are best handled by a suitably experienced technician.

Checking the result after installation

Reassemble the working area fully and follow the normal service checks for the affected system. Depending on the component, this may involve confirming leak-free connections, unobstructed travel, a correct sensor response or the machine's approved nozzle and alignment checks. Observe the original symptom again under the same operating conditions used for diagnosis.

A brief successful power-up is useful, but it is not a complete result for an intermittent fault. Start with a controlled test rather than immediately committing a long production job. Keep the first sample or service record so any remaining issue can be compared against a clear baseline.

Service life and sensible maintenance

Operating conditions and maintenance history influence how service components behave over time. Keep the relevant area clean, protect connections from strain and follow the machine's replacement or inspection schedule where one is specified. Service life varies with the application and maintenance. A replacement restores its intended function within the existing system; it does not change the printer’s overall specifications.

Record the installation date, part identification and observations from the test. If the same symptom returns, that history helps identify a recurring issue elsewhere in the machine rather than repeating the same replacement without understanding why the component is being affected.

Recommended Add-ons from DTFShop

To complete the workflow, you may also check these related DTFShop products when they match your machine or printing process:

Practical questions

Does replacing this part fix every printing fault?

No. Use the original symptom and the component’s function to guide diagnosis. Ink starvation, a poor cap seal, damaged wiring and a failed nozzle can create similar output problems. Compare the normal service checks before and after replacement so a different fault is not mistaken for a defective new part.

What should I record after fitting?

Keep the part identity, installation date and the result of the machine’s normal service test. Note any change to connections, routing or alignment. A short record makes repeat maintenance easier and helps identify a fault that returns elsewhere in the system.

Product video guides

An exact-product installation and quality-test video is being verified. Unrelated demonstrations have been removed.

How to install or replace this accessory

Related-machine installation reference

Change the Wiper

Manufacturer wiper replacement demonstration. Wiper length, bracket and maintenance-station height may differ; match the supplied blade and machine service procedure.

Source: Microtec Heat Press (external channel)

Watch installation on YouTube

Additional information

Weight 0.1 kg
Dimensions 20 × 15 × 10 cm

Reviews

There are no reviews yet.


Be the first to review “Long Printhead Wiper Blade for Matching DTF Printer Maintenance Stations, 1 Piece”

Up to 3 JPG, PNG or WebP photos, 5 MB each. Your photos will be public after review approval. Avoid faces, addresses and other private details.

50 points for your honest product review

Eligible verified purchases only. One reward per delivered order, regardless of rating. Photos are optional. Points are credited to the purchaser’s DTFShop rewards account after verification and can be used on a future purchase under the wallet rules. This is store credit, not cash. Your review will show a reward disclosure. Google reviews earn no points.